Fevicol Ezee Spray Instant Contact Adhesive, 383g

Name: Fevicol Ezee Spray Instant Contact Adhesive, 383g
Brand: HomeRun
SKU: R74UF
Price: 540.0 INR
Availability: InStock

₹540

5%FLAT

Cashbackon 1 Lakh+ orders

Incl GST Shipping calculated at checkout.

Brand: Fevicol (Pidilite)
Product: Fevicol Ezee Spray Contact Adhesive
Type: Aerosol contact adhesive (solvent-based synthetic rubber)
Pack Size: 500 ml can (383 g net weight)
Flash-Off Time: 1 – 2 minutes before joining
Grab: Bonds in 10 seconds of firm pressure – no clamps needed
Heat Resistance: Up to 115°C
Coverage: Approx. 12 – 15 sq ft per 500 ml (383 g) can (both sides coated)
Packaging: 01 Nos (Single Can)
Application: Wall & ceiling cladding, laminate and veneer pasting, on-site edge banding & repairs

Fevicol Ezee Spray is an aerosol contact adhesive that grabs in just 10 seconds once both coated surfaces are pressed together, with no masking tape, nails or clamps. It is ideal for vertical walls, ceilings and tight corners where clamping is not possible.

Its 3-stage adjustable nozzle (High, Medium, Low) sprays a lace-like web rather than a fine mist, giving even coverage without lumps showing through thin laminates or charcoal sheets, and less overspray. The bond withstands heat up to 115°C, suiting surfaces near kitchen chimneys and in strong sunlight. No brushes, rollers or glue buckets are needed. Each 500 ml can has a net weight of 383 g.

Key Features

10-Second Grab: Locks on contact with firm hand pressure – no clamps, nails or tape
Adjustable 3-Stage Nozzle: Narrow for edge bands, wide for broad boards
Lace-Web Spray Pattern: Even coat with no lumps under thin sheets and minimal overspray
Heat Resistant to 115°C: Holds near chimneys, backsplashes and sun-facing walls
No Tools Needed: Spray straight from the can, with less mess and waste

Product Specifications Table

Technical Specifications (Quick Reference)

Specification Parameter	Technical Detail
Brand	Fevicol (Pidilite)
Product	Fevicol Ezee Spray Contact Adhesive
Type	Aerosol contact adhesive (solvent-based synthetic rubber)
Pack Size	500 ml can (383 g net weight)
Flash-Off Time	1 – 2 minutes (depends on temperature)
Open Time	Up to 30 minutes
Grab / Handling / Full Cure	10 seconds / 5 – 10 minutes / 24 hours
Heat Resistance	Up to 115°C
Coverage	Approx. 12 – 15 sq ft per 500 ml (383 g) can (both sides coated)
Packaging	01 Nos (Single Can)
Application	Wall & ceiling cladding, laminate and veneer pasting, on-site edge banding & repairs

Recommendations & Ideal Use-Cases

Where this fits best

Wall & Ceiling Cladding: Acoustic foam, PU foam sheets, rockwool and glass wool on walls and overhead ceilings, without slipping
Modular Furniture: Laminates (HPL), charcoal sheets, veneers and wood accents onto plywood, MDF, particle board or blockboard
On-Site Patchwork: Edge banding, quick repairs and hard-to-reach corners where clamps can't be used

Application Guidelines

Surface Prep: Both faces must be clean, level, completely dry and free of oil, grease and dust
Shake the Can: Shake vigorously for up to 1 minute
Spray Both Surfaces: Hold the nozzle 4 – 10 inches (100 – 250 mm) away and spray an even layer on both surfaces with a steady hand
Wait 1 – 2 Minutes: Let the solvent flash off until the film feels very tacky but doesn't transfer to your finger
Join & Press: Align carefully, bring surfaces together and press firmly across the whole face for 10 seconds
Cure: Handling strength in 5 – 10 minutes; full cure in 24 hours
Safety: Use in a well-ventilated area and keep away from flames and heat while spraying

1) Do I spray one surface or both?

Both. Ezee Spray is a contact adhesive, so the film on each surface must meet to create the 10-second grab. Spraying only one side greatly weakens the bond and can cause peeling.

2) Can I join the pieces straight after spraying?

No. Wait 1 – 2 minutes for the solvent to flash off. Joining while the glue is still wet traps solvent underneath, causing bubbles and eventual bond failure.

3) Why is the adjustable nozzle better than a regular spray can?

Regular sprays release a fine mist that drifts and can pool into lumps under thin sheets. Ezee Spray's High / Medium / Low nozzle sprays a controlled lace-like web, so you can go narrow for edge bands or wide for boards, with even coverage and less overspray.

4) Can I use it near kitchen heat?

Yes. The bond withstands heat up to 115°C, so it suits panels near chimneys and stove backsplashes, and walls in direct sunlight.

5) What is the net weight of one can, and how much area does it cover?

Each 500 ml can has a net weight of 383 g and covers about 12 – 15 sq ft with both sides coated. Since both mating surfaces need spraying, plan your quantity on the combined area of both pieces, not just one side.

Why Buy from HomeRun?

Authentic Fevicol Product: Verified genuine product sourced from authorized Pidilite channels
60-Minute Bangalore Delivery: Express delivery to active service zones – ideal for urgent site work
Project-Friendly Availability: Single-can ordering for cladding, furniture and repair jobs

Return within 24 hours of delivery for:
- Damaged or defective product
- Wrong or missing item
Product cannot be returned once opened or used
Refer to Refund Policy for complete details

pidilite fevicol ezee spray contact adhesive aerosol spray glue 500ml 383g laminate veneer acoustic foam ceiling cladding edge banding 115 degree heat resistant bangalore