Fevicol WoodLok Pro, Moisture Resistant Synthetic Resin Adhesive, 60Kg

• Brand: Fevicol (Pidilite)
• Product: Fevicol Woodlok Pro Synthetic Resin Adhesive
• Type: Water-based, solvent-free synthetic resin adhesive (industrial grade)
• Pack Size: 60 kg HDPE barrel
• Colour: Off-white emulsion, dries clear/white
• Application Method: Manual roller, brush or automated glue spreader
• Full Cure: 24 hours before machining or heavy loads
• Packaging: 01 Nos (Single Barrel)
• Application: Cold press laminate pasting, modular furniture & cabinet assembly, wood-to-wood bonding

Fevicol Woodlok Pro is an industrial-grade synthetic resin adhesive for modular furniture factories, OEM manufacturers and cold press lamination lines. Supplied in a 60 kg barrel, it is ready to use, water-based and solvent-free.

Its controlled viscosity spreads evenly under rollers and automated spreaders without pooling or starving the glue line, and its high initial tack shortens press cycles so panels move through production faster. It bonds hardwood, softwood, plywood, MDF and particle board, and handles the humidity of kitchens and bathrooms. Allow 24 hours for a full cure before machining.

Product Specifications Table

Recommendations & Ideal Use-Cases

Application Guidelines

1) How is Woodlok Pro different from Fevicol SH?

Fevicol SH is a carpenter's hand-applied glue. Woodlok Pro is an industrial adhesive with viscosity tuned for machine rollers and cold presses, plus higher initial tack for shorter press cycles. It comes in a 60 kg barrel for continuous production.

2) Can it be used in automated glue spreaders?

Yes. It is made for both manual application and automated spreaders. Check your machine's viscosity requirements and run a trial batch before full-scale production.

3) When can bonded panels be machined?

Panels can be handled soon after pressing, but wait 24 hours for full strength before trimming, edge-banding, routing or sanding. Machining earlier can cause laminate edges to lift. Warm, dry conditions speed up curing; cool, humid conditions slow it.

4) Is it suitable for kitchen and bathroom cabinets?

Yes. It handles the humidity of kitchens and bathrooms. It is not suitable for outdoor use or anything permanently submerged in water; use a marine-grade adhesive for those.

5) Can it fill gaps or bond plastics?

No. It is a thin-film assembly adhesive and cannot fill gaps or hollows. It also does not bond low-surface-energy plastics such as PE, PP or Teflon (PTFE).

6) How should the barrel be stored?

Keep it in a cool, dry place away from sunlight and heat, and protect it from freezing. Reseal tightly after each use. Check the manufacture date on the label for shelf life.

Why Buy from HomeRun?

1. Return within 24 hours of delivery for:
   • Damaged or defective product
   • Wrong or missing item
2. Product cannot be returned once opened or used
3. Refer to Refund Policy for complete details